Blender Lid - Topcom Baby Blend & Cook Manuel D'utilisateur

TOPCOM Baby Blend & Cook
4.2 Assembly
Steamer Basket Handle
Place the handle in the upward position and slide it upwards
to secure to the steamer basket.
Remove the handle from the steam basket in the inverse
direction.
Steamer Basket
Place the steamer basket onto the water tank. Make sure the
triangle icon on the basket is aligned to the "unlock" position
on the base.
Turn the handle clockwise to the "lock" position.
Remove the steamer basket in the inverse direction.
Blades
!!! The blades are very sharp, be careful when handling.
Place the searing ring on the bottom of the blade.
Using your hand, hold the top of the blade and place it
through the hole on the bottom of the bowl.
Turn the bowl over with its opening downward, place the
blade retention nut on the blade's other end and twist it anti-
clockwise until it locks into position.
Remove the blade in the inverse direction.

Blender Lid

Place the lid on the bowl as the below drawing, turn it
anticlockwise until it locks into position.
Remove the blender lid in the inverse direction.
Warning: This unit has an interlocking system. The unit will
not operate unless the lid has been fitted correctly. Do not
attempt to start the unit without the lid being correctly placed
and locked into position.
Blender Bowl
Place the blending bowl over the centre post in the base.
Make sure the triangle icon on the blending bowl is aligned
to the "unlock" position on the base. Turn the handle anti-
clockwise to the "lock" position.
Remove the blender bowl in the inverse direction.
6 TOPCOM Baby Blend & Cook