EASYREC120
4.
Refrigerant recovery from the A/C system
4.1.
W
ARNING
To recover the refrigerant in a quick and efficient way, we suggest to connect the recovery unit to the
cooling system by means of a 2-way manifold and flexible hoses with ball valves, which are not included
in the standard equipment.
Before starting refrigerant recovery, the manifold, the flexible hoses and the filter drier must have been
previously evacuated.
During refrigerant recovery, the cooling system must be turned off.
4.2.
R
EFRIGERANT RECOVERY
Make sure that the V1 valve is on position "Recovery/Recycling"
a)
Connect the refrigerant circuit to the recovery unit by means of flexible hoses with ball valve, as
shown by the picture.
WIGAM
USER'S MANUAL
/
RECYCLING
IMPORTANT
ENGLISH
30