Description; Introduction; Packing List; Optional Accessories - Harman AKG PR4500 Mode D'emploi

Thank you for purchasing an AKG product. This Manual contains important instructions for
setting up and operating your equipment. Please take a few minutes to read the instruc-
tions below, particularly section 1 "Safety and Environment", carefully before oper-
ating the equipment. Please keep the Manual for future reference. Have fun and impress
your audience!
• 1 PR4500 bodypack receiver
• 1 belt clip
• 2 AA size dry batteries
• 1 hot-shoe adapter
• 1 connecting cable (2.5 mm jack to XLR)
• 1 connecting cable (2.5 mm jack to 1/8" jack)
• Check that the packaging contains all of the items listed above. Should any of these
items be missing, please contact your AKG dealer.
• For optional accessories, refer to the current AKG catalog or folder, or visit www.akg.com.
Your dealer will be glad to help.
The PR4500 bodypack receiver has been designed specifically for use with WMS4500 Se-
ries transmitters from AKG. You can connect any headphone with a 1/8"jack plug to the
headphones jack on the receiver.
To power the receiver you can use either the two supplied dry batteries or the optional
BP4000 battery pack from AKG.
The hot-shoe adapter with mounting plate allows you to attach the receiver to a camera or
camera stand in seven different positions.
You can easily mount the receiver securely on equipment with no hot shoe or stand-mount-
ing thread using commercial velcro fastener (not included).
9
7
1 HP OUT: Adjustable 1/8" TRS output jack for headphones .
2 ON/OFF button.
3 Permanently attached flexible antennas
8 1
2
4
5
6

Optional Accessories

3
Fig. 1: Controls and outputs.

2 Description

Introduction

Packing List

PR4500
Bodypack Receiver

Controls

Refer to fig. 1.
23