What's In The Box; Specifications - Pinnacle Climate Technologies Remington SilentDrive REM-150T-SDR-B Manuel De L'utilisateur Et Mode D'emploi

Tip: Be sure to remove the axle from the side of
the Styrofoam packaging.
Tip: Use a power screwdriver and locking wrench
for easier assembly.
50 mm Screws (8)
Axle Nuts (2)
Model #
Rating: Btu/Hr
Fuel Consumption: Gal/Hr / L/Hr
Fuel Tank Capacity: Gallons / Liters
Pump Pressure: PSI / BAR
Volts: AC/Hz
Amps
Phase
© 2019 Pinnacle Climate Technologies, Inc.
NEVER LEAVE HEATER UNATTENDED WHILE BURNING OR

WHAT'S IN THE BOX

30 mm Screws (2)
Heater (1)
Axle
Wheel Support Frame

SPECIFICATIONS

Specifications subject to change without notice.
WHILE CONNECTED TO A POWER SOURCE
Tools Needed:
- Phillips head screw driver
- 8 mm open end wrench
- 19 mm open end wrench
8 mm Nuts (10)
Spacers (2)
Front Handle
150T-SDR
150,000
1.14 / 4.32
10 / 37.9
111 / 7.65
120VAC ~ 60 Hz
≤3.15A
1Ø
Silent Drive Forced Air Heater User's Manual
4
Tires (2) Safety Guard (1)
Rear Handle
220T-SDR
220,000
1.67 / 6
13 / 49
121 / 8.3
120VAC ~ 60 Hz
≤3.15A
1Ø