Protection Fuses - GBD F4 PLUS Instructions D'installation

F4 PLUS

6 - PROTECTION FUSES

Position Value
F1 5A
F2 160mA
7 - WARNING LEDs
LED Colour
L1
RED
L2 RED
L3 RED
L4
RED
L5 RED
L6 GREEN
L8
GREEN
L10 RED
Type Description
Protects the circuit board and the motors.
FAST
FAST Protects the circuit board and the accessories.
Signal
Description
Always on. Goes off when the CLOSING LIMIT SWITCH of motor 2
FCCM2
is reached.
Always on. Goes off when the OPENING LIMIT SWITCH of motor 2
FCAM2
is reached.
Always on. Goes off when the CLOSING LIMIT SWITCH of motor 1
FCCM2
is reached.
Always on. Goes off when the OPENING LIMIT SWITCH of motor 1
FCAM1
is reached.
PHOTO Always on. Goes off when the photocell is intercepted interrupting the beam.
Comes on when the START command is activated and goes off when
START
released.
Comes on when the PEDESTRIAN start command is activated and goes off
PED
when released.
SAF. / STOP Always on. It turns off after STOP/COSTA INPUT intervention.
13
UK