Selecting - Ecolab Elados EMP III E60 Mode D'emploi

10.2.4.1 Selecting

10.2.4.1.1 Setting operation mode / current / user defined
NOTE
The difference in the set values must be greater than or equal to 5. (e.g. min. 10 max. 15).
Fig. 10.12 Setting operating mode / current / user defined
417101441_EMP_III_E60.docx
Fig. 10.11 Operating mode / current
(external standard signal): Selecting
see chapter
„Setting operation mode / current /
user defined"
- 103 -
10.2.4.1.1
Rev. 13-10.19