ARDES AR4R07S-R09S-R11S Mode D'emploi page 15

MOUNT THE SUPPORT WHEELS
Insert the wheels into holes "C" and "D" in the metal supports and fasten
them with the nuts.
Turn the apparatus upside down, unscrew the wing nuts from the bracket
(fig. 1) and insert the bracket between the first and second element (fig.
2). Insert the end of the bracket into holes "A" and "B" in the metal support
(fig. 3) and fasten it by using wing nuts (fig. 4).
Mount the other bracket as described above, positioning it between the
last and second-last element of the radiator.
1
Before connecting or disconnecting the appliance, make sure that the
power selector (4) is in the OFF position ("0").
To turn the appliance on, insert the plug in the power outlet, set the power
selector (4) in the desired position and turn the adjustable thermostat (3)
clockwise to the maximum position.
Once the desired room temperature is reached, turn the thermostat (3)
slowly, in a counter clockwise direction, until the appliance is turned off.
At this point, the product will automatically restart when the temperature
in the room goes below the set limit.
The indicator light (2) indicates that the appliance is operating and will
switch off when the adjustable thermostat is activated.
Before replacing the appliance in its package, make sure it has cooled
sufficiently.
This appliance does not require any special maintenance.
Disconnect the plug from the socket and let the appliance cool down well
before cleaning it.
In order to clean the appliance, use a soft or slight damp cloth.
Never use abrasives or chemical solvents.
Do not use very wet substances, liquids or cloths to prevent water from
entering into the apparatus and irreparably damaging it.
NEVER IMMERSE THE APPLIANCE INTO THE WATER.
2
Maintenance
3 4
GB
15