Cleaning - Atag WS9111MRL Mode D'emploi

MAINTENANCE

Cleaning

Attention!
Switch the power supply off before carrying out any maintenance!
Remove the plug from the socket or turn the switch in the meter
cupboard to '0'. The hood must be cleaned regularly, both the inside
and the outside (with at least the same regularity as used for cleaning
the grease filters). Do not use any products that contain abrasive
materials.
Do not clean with alcohol!
Attention!
If you do not follow these instructions with regards to the cleaning of
the appliance and the cleaning or replacement of the filters, this can
lead to fire. It is essential to follow these instructions!
The manufacturer is not liable for damage to the motor or damage as a
result of fire that is due to improper servicing or not following the above
safety requirements.
Cooker hood
Clean the cooker hood with a soft cloth with water and a little
detergent. Then wipe with clean water. Do not use aggressive cleaning
agents such as soda. The cooker hood's coating will remain in good
condition when you occasionally wax the coating.
Stainless steel hoods
Do not use scouring sponges or other abrasives on stainless steel
hoods. Give a finishing clean with a non-abrasive, non-polishing agent
and rub in the direction of the surface finish of the stainless steel.
Metal grease filters
Metal filters must be cleaned once a month (or when indicated by the
filter cleaning indicator) with neutral cleaning agents, by hand or in
the dishwasher at low temperatures using a short programme. Put the
grease filters in the dishwasher with the openings facing down so that
the water can drain. Aluminium grease filters will become dull from the
cleaning agents in the dishwasher.
This is normal, and does not affect the performance.
EN 11