Replacing The Tires On The Cleaner - Polaris 9300xi Sport Manuel Du Propriétaire

Page 14

5.4 Replacing the Tires on the Cleaner

1. Pull on the inside of the old tire to remove the tire
lip from the wheel. See Figure 33.
Figure 33. Pull the Old Tire Over the Wheel
2. Remove the old tire as shown in Figure 34.
Figure 34. Remove the Old Tire
3. To replace the tire, position the tire on the wheel
making sure to orient the tire so that the tread is on
the outer side of the wheel. See Figure 35.
1
!
Figure 35. Tire Replacement Orientation
1
2
4. Push one side of the tire on to the wheel and fi t the
rib of the tire in the groove of the wheel as shown
in Figure 36.
Figure 36. Start on One Side of the Tire
5. Work the tire onto the wheel and verify the rib of
the tire is positioned properly within the groove of
the wheel. Refer to Figure 37.
Figure 37. Work the Tire On Around the Wheel
6. Push and position the rib of the inner side of the
tire in the groove of the wheel. Refer to Figure 38.
If needed, turn the wheel gently to help with
installation.
Figure 38. Push the Tire into Place on the Wheel
2
3
4