Kenwood KSC-SW10 Mode D'emploi page 4

Connection
Caution:
Before wiring, be sure to remove the wire from the negative terminal of the battery. After completing all wiring, check the correct wirings
again. After checking, connect the wire from the negative terminal of the battery.
Terminals of Subwoofer
Connecting the remote control unit
Notes:
• If the cord is not connected properly, the power indicator on the remote control unit and the illumination on the main unit do not light up.
• If the remote control unit is not connected properly or at all, the subwoofer does not output the sound.
• Do not insert the remote control connector upside down or forcibly. Otherwise, malfunction may result.
4
English
Connect with the lock part
of remote control jack facing
down.
8 Remote control
POWER/SPEAKER INPUT terminal
(for Speaker cords)
REMOTE terminal
LINE IN terminal
(for RCA pin jack)