Fault code
The device operates with
interruptions
Unusual sounds
Unusual vibrations
Unsatisfactory result
Type / Model
year of construction
Motorrating P
1
Mains voltage / Mains frequency
Main fuse
No-load speed n
0
Working width
Diameter of working tools
Number of blades
Hand arm vibration
Measuring uncertainty
Sound levels at the work-place L
(according to 2000/14/EC)
Measuring uncertainty
Sound levels L
(according to 2000/14/EC)
WA
measured sound power level
guaranteed sound power level
Measuring uncertainty
Dimensions
Weight
Protection class
Protection class
Please note the attached guarantee declaration.
Possible cause
Extension cable defective.
Internal fault
ON/OFF switch defective
Hoeing tools blocked
Loose screws, nuts or other fasteners
Lack of lubricant
Lubricant emerges
Hoeing tools damaged or dull
Excessive working depth
Dull hoeing tools
Insufficient working depth
Specifications
PA
Corrective action
Check extension cable, exchange defect cable
immediately
Contact the customer service
Contact the customer service
Remove the blockage
Tighten all parts; contact customer service if the
noises continue to occur.
Refill lubricant.
Contact the customer service
Contact the customer service
Reduce the working depth.
Contact the customer service
Increase the working depth.
Guarantee
BH 1400 N
see last page
1400 W
230 V~ / 50 Hz
10 A inert
300 min
–1
400 mm
200 mm
24
0.862 m/s
2
K = 1.5 m/s
2
78.8 dB (A)
K
= 3.0 dB (A)
PA
90.79 dB (A)
93 dB (A)
K
= 1.75 dB (A)
WA
approx. 1130 x 408 x 1000 mm
approx. 13.5 kg
II – protective insulated
IPX4
Technical modifications reserved!
21