AEG Electrolux PERFECT DB 1 Série Mode D'emploi page 14

822 949 340 DB_1100.book Seite 14 Montag, 28. April 2008 11:51 11
g
Cleaning
As a precaution we recommend clean-
ing every three months.
0 Unplug from the mains.
0 Set the steam selector (Figure 1/F) to
position (Figure 4/A).
„ "
0 Fill the water reservoir (Figure 1/O)
with clear water to the "MAX" mark.
0 Set the temperature selector
(Figure 1/N) to "MAX".
0 Insert the plug into the socket.
0 Wait until the power indicator
(Figure 1/J) goes out.
0 Set the steam selector (Figure 1/F) to
position (Figure 4/C).
0 Place the appliance horizontally over a
sink.
0 Press the steam selector (Figure 1/F) for
at least 1 minute.
Water is flowing out of the steam exit
holes. Your steam iron is now ready for
use again.
What to do, if ...
• no "steam" appears when using on a
steam setting?
– In warm, dry air (during the winter),
reduced amounts of vapour are nor-
mal because it is absorbed by the dry
air before condensing.
– Emptying the filled water reservoir
can wash out fluff. Remove the
mains cord and tip the filled appli-
ance forwards at an angle (Figure 7)
so that the water can run out of the
filling aperture.
• drops of water are coming out of the
steam exit holes?
– Do not set the steam selector to
another position than
temperature for steam ironing has
been reached. If the temperature has
been set too low for steam ironing
increase the setting.
• stains appear on the washing while
ironing?
– Clean the steam iron. Rub the sole-
plate while still warm with a mixture
14
of water and vinegar or with a non-
abrasive cleaning agent.
– When dry ironing fluff can enter the
steam chambers and carbonise. This
can lead to stains as the water
passes through. Therefore also clean
the inside of the water reservoir. Fill
it with water and gently shake the
steam iron. Then pour the water out.
• the soleplate is rough or furred?
– The iron temperature was set too
high.
– Select the correct ironing tempera-
ture for the fabric (see ironing
table).
Disposal
2 Packaging material
The packaging materials are environ-
mentally friendly and can be recycled.
The plastic components are identified
by markings, e.g. >PE<, >PS<, etc.
Please dispose of the packaging mate-
rials in the appropriate container at
the community waste disposal facili-
ties.
2 Old appliance
The symbol
its packaging indicates that this prod-
uct may not be treated as household
waste. Instead it shall be handed over
to the applicable collection point for
the recycling of electrical and elec-
tronic equipment. By ensuring this
product is disposed of correctly, you
will help prevent potential negative
consequences for the environment and
human health, which could otherwise
be caused by inappropriate waste han-
until the
„ "
dling of this product. For more detailed
information about recycling of this
product, please contact your local city
office, your household waste disposal
service or the shop where you pur-
chased the product.
W
on the product or on