Scope Of Supply And Description; Use; Before Initial Use - NUK Flash Mode D'emploi

Warning and safety instructions
Do not dispose of used batteries in normal waste. Take them to
an in-store battery collection system or to your nearest recycling
centre for special refuse.
Do not dispose of the device as normal waste. Instead, take it to
an official collection centre for electrical devices.
No modification of this equipment is allowed.
1.3

SCOPE OF SUPPLY AND DESCRIPTION

NUK Flash Thermometer as shown in Figures 1 and 2:
1 Protective cap
2 LCD display
3 SCAN button
4 Probe head
5 Battery compartment lid
2

USE

2.1

BEFORE INITIAL USE

Remove all packaging material from the device, as well as the battery insulation strips.
Clean the device as shown in section 3.2.
6 Reflective mirror with sensor lens
7 Unlatching opening for battery
8 ON/MEM button
9 CR2032 battery (inserted in device)
Instructions for use (not shown).
- 33 -
Sec-
tion
no.
3.3 21
3.3 22
6. 23