tomado TM-1980 Mode D'emploi page 30


This deep fryer is protected with a thermal safety device, which switches the
machine off automatically if it overheats.

Never immerse the unit in water.

Never leave the deep fryer unattended while in use. Always ensure the safety of
children if they are near the deep fryer.

If the deep fryer and/or cord are damaged, they must be repaired by a
professional service department.

Do not try to repair the unit by yourself, neither to replace a damaged cord. This
requires special tools.

Be sure not to damage the heating element. (Do not bend or dent.)
SAFETY THERMAL CUT-OUT
In the event of overheating, the thermal cut-off will switch off the deep fat fryer. This
can happen if the deep fat fryer is not filled with sufficient oil or solid frying fat is
melted in the deep fat fryer. In the case of solid fat, the heating element is unable to
radiate the produced heat quickly enough. If the safety thermal cut-out switches off
the deep fat fryer, proceed as follows:
 Unplug the fryer, allow the oil or fat to cool down completely;
 The deep fat fryer is now ready to use again.
OVERHEATING PROTECTION
 If you should accidentally switch on your deep fat fryer when there is no oil or fat
in it, the overheating protection is automatically turned on. The appliance is no
longer ready to be used. Unplug the deep fryer and allow the deep fryer & all
parts to cool down completely.
 Remove the cooled-down heating element from the appliance with the electric
control unit. Place the heating element so that it is facing towards you.
 Press the RESET button with a pointed object. The RESET button is in a small
indentation behind the right-hand heating bar.
 Reassemble the deep fryer. After this, the appliance is ready to use again.
TECHNICAL DATA
Type nr: TM - 1980
Power: 2570-2800W
Supply voltage: 230-240V ~ 50Hz
Dimensions:
Product measurements: 355 x 290 x 250 mm
Net weight: 3.96 kg