tomado TM-1980 Mode D'emploi page 25

Electricity and heat
 Before use, check that the mains
power supply voltage is the same as
the voltage is the same as the
voltage indicated on the appliance.
 Always plug the appliance into an
earthed plug socket.
 Regularly check the power cord for
damage.
 Do not operate any appliance with
a damaged cord or plug or after the
appliance malfunctions,
dropped or damaged in any manner.
Return appliance to manufacturer or
the nearest authorized service agent
for examination, repair or electrical
or mechanical adjustment.
 To remove the plug from the plug
socket, pull the plug. Do not pull the
power cord.
 Make sure the power cord does not
come into contact with hot surfaces
or steam.
 Always remove the plug from the
plug socket before you move the
appliance.
 The machine should not be operated
by means of an external timer-switch
or by means of a separate system
with remote control.
 If an extension cord is absolutely
or is
necessary, a 10-ampere cord should
be used. Cords rated for less
amperage may overheat. Care
should be taken to arrange the cord
so that it cannot be pulled or tripped
over.