Technical Specifications - Kärcher DS 5.800 Mode D'emploi

Caution
Do not rinse out the HEPA filter!
 Remove the outgoing air flap.
Illustration
 Remove the HEPA filter.
 Insert a new HEPA filter so that it
"CLICKS" into place.
 Reinstall the lid so it "CLICKS" into
place.

Technical specifications

Nominal voltage
1~50/60 Hz
Output P
nom
Fill capacity of the water
filter reservoir
Sound
Weight (without acces-
sories)
Nominal width, accesso-
ries
DS 5.800 Waterfilter:
HEPA filter H 12 class according to EN
1822 (effective 1998)
Subject to technical modifications!
You can rectify minor faults yourself with
the help of the following overview.
If in doubt, please consult the authorized
customer service.
Turn off the appliance and remove the
mains plug prior to any care and mainte-
nance work.
Repair works may only be performed by the
authorised customer service.
127 V
Power supply is interrupted
955 W
 Remove the mains plug, check the con-
1,7 l
67 dB(A)
7,5 kg
35 mm
Troubleshooting
DANGER
Appliance does not vacuum
necting cable and the mains plug for
damage.
English 17