-827-4985 · model no. 052-9299-2
Toll-free : 1-866
WARNING!
Read each step carefully before beginning any installation and make sure you
understand each step.
Keep children and pets away during installation.
Keep fingers away from the places where they can be pinched or injured.
Tools Needed for Assembly (not supplied):
Materials
Wiring, outlet box and box connectors must be of the type required by the local code.
The minimum wire should be a three-conductor (two-wire with ground) of the following sizes:
Unpacking Instructions
Unpack and inspect carefully to make sure all parts are included and not damaged (fig. 1).
Place all parts from the box on a working space in a cleared area.
WARNING!
Do not install or use the ceiling fan if any part is damaged or missing.
WARNING!
or circuit breaker box before installing, servicing or cleaning.
shock (fig. 2).
1 cross-head
screwdriver
1 flat screwdriver
1 wrench
Wire Length
Up to 50' (15 m)
50-100' (15-30 m)
1 stepladder
1 wire stripper
1 drill
Wire Size (A.W.G.)
14
12
/pliers