Machine Maintenance; After Each Use - Tennant R3 Manuel Opérateur

OPERATION
EN
4. Operate the accessory tool (Figure 20).
WARNING: Fire or Explosion Hazard, Do Not
Use or Pick Up Flammable Materials.
FIG. 20

MACHINE MAINTENANCE

To keep the machine in good working condition, simply
follow the machine's maintenance procedures.
FOR SAFETY: Before performing maintenance
procedures turn off machine and unplug power
cord from wall outlet.
ATTENTION: Contact an Authorized Service Center
for machine repairs.

AFTER EACH USE

1. Wipe clean the power cord and inspect it for
damage (Figure 21). Wrap power cord around
handle and cord hook when not in use (Figure 22).
FIG. 21
WARNING: Electrical Hazard, Do Not Operate
With Damaged Power Cord.
If the power cord is damaged or broken, it must be
replaced by the manufacturer or its service agent
or a similarly qualified person in order to avoid a
hazard.
10
FIG. 22
Home Find... Go To..
2. Empty the recovery and solution tanks and
thoroughly rinse with clean water (Figure 23).
FIG. 23
3. Clean the vacuum shut--off float (Figure 24) and
the vacuum intake screen of any debris buildup
(Figure 25).
FIG. 24
4. Clean the solution hose screen (Figure 26).
FIG. 26
FIG. 25
Tennant R3 (03- -08)