Getting Started; First Steps; Installing The Base Station - Topcom SOLOGIC B921 Guide Rapide

1 Getting started

Thank you for purchasing this product. This product has been
designed and assembled with utmost care for you and the
environment. Because we at TRISTAR like to think of the future of our
planet and our children, we aim to do our best to help saving the
environment. This is why we decided to reduce the number of pages
of our user guides and product manuals. If you keep in mind that it
takes up to 24 trees to produce 1 ton of paper, publishing product
manuals in 11 languages costs our planet a lot of trees. In this short
manual provided with your device you can find a brief explanation of
how to install and use your device.
If you would still like to discover all the features of your new device,
please visit our website (www.tristar.eu) where you can download the
complete user manual in your language. By doing this TRISTAR hopes
to do its share to make our planet a better place, but we can only
succeed with your help!

2 First steps

2.1 How to use this user guide
The following method is used in this user guide to clarify instructions:
Key to be pressed

2.2 Installing the base station

Install the base station as follows (see figure 1 on the folding page):
Connect the mains adapter to the base station first and then to
1
a socket.
Connect one end of the telephone cable to the telephone socket
2
on the wall and the other to the connector on the back of the
base station.
The telephone and power cables should be connected as
3
shown in figure 1.
Text ....... „Display".
Text that appears on the telephone display
Getting started
3