Survey; Functional Description; Assembly Instructions; Operation - Grizzly Tools EFB 404 2er Set Notice D'utilisation

Survey

1 Handle
2 On/off switch
3 Mains cable
4 Switch lock
5 Strain relief
6 Handle screw, additional handle
7 Screw socket for length
adjustment, handle
8 Telescopic arm
9 Screw socket, telescopic tube
locking device
10 Brush box
11 Splash guard
12 Narrow metal brush
13 Motor head
14 Guiding roller
15 Narrow plastic brush
16 Additional handle
17 Release button, spare brush hol-
der (not visible)

Functional description

The hand-operated joint brush is equipped
with an electric motor.
Depending on the application require-
ments, two different brushes can be used
for cleaning joints.
The telescopic arm enables a comfortable
operation in an upright posture.
Please refer to the descriptions below for
information about the operating devices.

Assembly instructions

Height-adjustable mounting of the
brush box:
Œ
Slide the brush box (10) along the
guide rails (21) on the motor head
(13) until it clicks into one of the two
possible positions (22).
Inserting/replacing the brush:
1. Push the brush support (23) to-

wards the motor head (13) and
insert the desired brush (12).
2. Release the brush support (23)
to let it return to the initial posi-
tion.
3. To remove the brush, push the
brush support (23) and remove
the brush.
The spare brush is released from
the spare brush holder (
pressing the release button
( 17).
The spare brush is fixed into the
holder by pressing the brush with
the hexagon into the hexagon slot
of the holder (

Operation

Caution, risk of Injury!
Always check whether the de-
vice functions correctly before
using it.
Always wear eye protection
when operating the device.
Always unplug the device before
working on it. There is a risk of
injury.
GB
25) by
25) until it clicks.
53