Sony TDG-BT400A Mode D'emploi page 6

Overview
Active 3D Glasses needs registration to TV.
When using Active 3D Glasses with another TV, re-registration is necessary.
Steps
1
Remove the battery's insulating
sheet before using the product
for the first time.
2
When using Active 3D Glasses for
the first time, hold the glasses
within a 50 cm range of the TV
and turn on the TV and hold the
 (Power) button/indicator for
2 seconds. The Active 3D Glasses
turn on and registration starts
(The  (Power) button/indicator
blinks green and yellow). When
registration is finished, a message
appears in the bottom right of
the screen for 5 seconds, and the
indicator will light up green for
3 seconds. This process is only
required one time.
If registration fails, the Active 3D
Glasses will turn off automatically.
In this case, repeat the above.
To turn on and off
To turn on : Press once the power button.
To turn off : Hold the power button down for 2 seconds.
GB
6
 (Power)
button / indicator
Insulating
sheet