Ring Illuminator - Zeiss Stemi 305 Mode D'emploi

ZEISS
Fig. 23

Ring illuminator

For switching the illumination intensity ON and OFF and adjusting the illumination intensity
refer to section 4.2.1, page 24.
26
OPERATION
Setting reflected-light illumination
4.2.4
•
By
successively, the user can change over between
four illumination states of the ring illuminator
(Fig. 23/3):
1. Press: full circle
2. Press: semi-circle
3. Press: quadrant
4. Press: two quadrants
•
When switching the semi-circle or quadrant
illumination
illuminated from the rear (from the direction of
the stand column).
•
By pressing the rear button once briefly
(Fig. 23/1), the adjusted segment is turned
forward clockwise by one quarter turn in each
case.
•
By pressing and keeping the rear button
(Fig. 23/1) pressed for over 2 seconds, the
adjusted segment is set into continuous rotation
(rotation steps of 1/8 circle, 1 second per turn in
each case).
•
By pressing the rear button once more
(Fig. 23/1),
specimen is backlit again.
435063-7044-010
Ring illuminator
pressing the front
(opposite each other)
ON, the specimen
rotation is stopped
Stereo microscope
Stemi 305
button (Fig. 23/2)
is first
and the
04/2015