Hornbach 6828262 Manuel D'installation Et De L'utilisateur page 176

Finish the top face plate
Place the 2 top corner face
plates on the seams of the
backside beam with the top face
plate, each in the correspond-
ing corner (L/R). Fix the top
corner face plates in place
by using a combination of 2
M6x30 full thread bolts
2 Ø6 rings (2 x)
The installation of the pergola
awning is now complete.
Connect the retractable screen
to a power source
Connect the power plug of the
cable on the backside beam to
a suitable socket (see technical
Make sure people cannot be-
come entangled in the power
cord. Keep cord away from heat,
oil, sharp edges.
Caution! If the supply cord is
damaged, it must be replaced
by the manufacturer or its ser-
vice agent or similarly qualified
person in order to avoid hazard.
Electrical work and repairs must
be performed by a qualified
electrician.
Caution: Make sure that the
power connection meets the re-
quirements stated on the type
plate, or in the technical data.
176 | ENGLISH
12
and
.
13
data).