English; Cleaning And Care - Koenic KVC150 Mode D'emploi

English

Congratulations
Thanks for your purchase of a KOENIC product.
Please read this manual carefully and keep it
for future reference.
Before first time use
Lock hose connector into the air intake open-
ing. Attach the handle and the floor brush to
the telescopic tube.
Use the vacuum cleaner
Pull out the cable. Plug the appliance in. Set
desired suction power on the speed control.
Use medium power (economical) for clothes,
upholstery or carpets. Use maximum power
for wooden, stone and heavily soiled floors.
Switch the vacuum cleaner on. After using the
appliance switch it off and unplug the supply
cord. Press the Cable Rewind Button (5) to reel
in the cable.
Recommendations
•
Press down the trigger on the Floor brush
to extend the bristles for hard floor.
•
Use the hard floor nozzle (12) on smooth
surfaces, the upholstery nozzle (10) for
couches and armchairs.
•
The furniture brush (11) can be put on top
of the crevize nozzle (13).

Cleaning and care

1. Unplug the appliance from the mains sup-
ply.
2. To change the filter bag press the unlock
key and swing open the lid of the dust
compartment until it locks into position.
3. Close filter bag by pulling the strap and
remove it.
4. Insert a new filter bag into the filter bridge
(see filter imprint). The suction opening of
the paper filter must be open.
5. Close the dust compartment securely.
14
Turn the speed
control to set the
desired power level
Attach the handle
with the telescopic
tube.
Use the bristles for
hard floor.
Change the dustbag
by opening the cover.
Before use, plug in
the unit.
Adjust the length of
the telescopic tube.
Take the accessories
from the accessories
compartment.
Change the motor
protection filter at in-
tervals of 6 months.