Location Requirements - Jennair JUIFX15HX Guide D'installation

SITE PREPARATION SITE PREPARATION
A
B
C
D

LOCATION REQUIREMENTS

Installation must comply with all governing codes
and ordinances.
Temperature
It is recommended that you install the ice maker in a
well-ventilated area with temperatures above
55°F (13°C) and below 110°F (43°C). Best results are
obtained between 70°F and 90°F (21ºC and 32°C).
Location
The ice maker must be installed in an area sheltered
from the elements, such as wind, rain, or water spray.
To ensure proper ventilation for your ice maker, the
front side must be completely unobstructed. The ice
maker may be closed in on the top and three sides,
however the installation should allow the ice maker to
be pulled forward for servicing if necessary.
The auxiliary grill kit provided can be used to align
the toe grill with the rest of the cabinets while not
obstructing ventilation of the ice maker.
Floor must be able to support the ice maker's total
weight, of more than 106 lbs (48.08 kg), including
door panels and contents of the ice maker. It is
important for the ice maker to be level in order to
work properly. If needed, you can adjust the height
of the ice maker by changing the height of the
leveling legs. The face of the cabinetry must be flush
with the front of the ice maker.
Check that the power supply cord, water supply line,
and drain line (on some models) are not damaged,
pinched, or kinked between the ice maker and the
cabinet.
Utility Location Range
A
Power Supply Cord
Range
B
C
Water Supply Line Range
D
SITE PREPARATION | 7
11 ⁄ " (29.2 cm)
1
2
28 ⁄ " (72.4 cm)
1
2
3 1 ⁄ " (8.9 cm)
2
9" (22.9 cm)