Installing Auxiliary Grill - Jennair JUIFX15HX Guide D'installation

INSTALLATION

INSTALLING AUXILIARY GRILL

34 | INSTALLATION
The auxiliary grill is an optional accessory. It can be
used to align the toe grill with the rest of the cabinets
(while not obstructing ventilation of the ice maker).
NOTE: Install auxiliary grill only after finishing the
complete ice maker installation.
Tools required:
TORX T20 screwdriver
■
1/8" straight drill bit and power drill
■
Remove packaging material and discard it.
1
Remove the screws that are taped inside
2
the auxiliary grill.
Place grill onto cabinetry. Align part so that
3
grating pattern on the auxiliary grill matches
that of the toe grill on the ice maker.
Center auxiliary grill on cut out for ice
4
maker. Mark hole locations on each side of
auxiliary grill on cabinet.
Using power drill and a 1/8" drill bit, drill
5
holes in cabinet. This is to fit screws of size
#8-18 x 0.750".
Using the TORX T20 screwdriver, screw
6
auxiliary grill into cabinet.