Jennair JUIFX15HX Guide D'installation page 33

INSTALLATION
From inside the door, install the wood
5
screws (2) through the slotted holes in the
top metal bracket. Adjust the panel side
to side to achieve a 1/8" (3.175 mm) gap
on both sides. Install the remaining screws
through the door bracket into the panel.
Remove top metal bracket along with
6
custom wood panel from ice maker door
and place aside.
Replace the top end cap into the door
7
panel.
Reinstall the top metal bracket along with
8
custom wood panel on ice maker door.
From inside the door, install wood
9
screws (6) through the holes in the bottom
metal bracket.
Reinstall the bottom end cap.
10
INSTALLATION | 33