Custom Wood Door Panel - Jennair JUIFX15HX Guide D'installation
Masquer les pouces
Voir aussi pour JUIFX15HX:
- Guide d'installation (84 pages) ,
- Guide d'utilisation et d'entretien (38 pages) ,
- Instructions d'installation (4 pages)
Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION
CUSTOM WOOD DOOR PANEL
32 | INSTALLATION
!
If stainless steel panel is installed, skip "Custom Wood Door Panel" section.
Remove screws (3) from the top metal
1
bracket. Remove and place metal bracket
aside.
Remove top and bottom end caps and
2
place aside.
Reinstall top metal bracket using screws (3)
3
removed in Step 1.
Lightly press the custom panel onto the
4
door using double sided adhesive tape.
Adjust height of the panel to achieve a 1/8"
(3.175 mm) gap between top of door panel
and counter sealing gap. Press the panel
firmly against door.
Publicité
Chapitres
Table des Matières
