INSTALLATION
LEVELING AND SECURING (CONT.)
30 | INSTALLATION
Push up on the top front of the ice maker
9
and locate the leveling screws on the
bottom front. Using an adjustable wrench,
adjust the height of the legs as follows:
Turn the leveling leg to the right to lower
■
the ice maker.
Turn the leveling leg to the left to raise the
■
ice maker.
Push up on the top rear of the ice maker
10
and locate the leveling legs on the bottom
rear. Repeat instructions in Step 3 to adjust
the height of the rear legs.
Use the level to recheck that the ice maker
11
is even from front to back and side to side.
If the ice maker is not level, repeat steps
9-10.