Jennair JUIFX15HX Guide D'installation page 29

INSTALLATION
Remove the screws attaching top and
3
bottom hinge covers using the flat head
screwdriver.
Top hinge cover
Bottom hinge cover
Remove the hinge cover from top and
4
bottom hinges.
To remove hinge covers, cut hinge cover at
5
indicated point using diagonal cutting plier
and remove from hinges.
NOTE: Reinstall the hinge covers if product
is removed from cabinet installation.
Refer instructions received with kit to install
6
stainless steel panel. Skip this step and go
to step 8, if custom wood panel is to be
installed.
Slide unit into the cabinet. Adjust the unit
7
until the unit panel is flush with adjacent
cabinets from all sides.
Slide unit into the cabinet. Hold the custom
8
wood door panel on the door. Adjust the
unit so that the panel is flush with adjacent
cabinets from all sides. For stainless steel
panel installation, skip this step.
INSTALLATION | 29