Jennair JUIFX15HX Guide D'installation page 27

INSTALLATION
Style 1—For a gravity drain system, push
2
the ice maker into position so that the ice
maker drain tube is positioned over the
PVC drain reducer. See the "Gravity Drain
System" section.
Style 2—For a drain pump system, connect
the drain pump outlet hose to the drain.
See the "Drain Supply Requirements"
section.
Recheck the ice maker to make sure that it
3
is level. See the "Leveling and Securing"
section.
Using cable tie, fix the drain pipe to rear
4
panel as shown in the illustration. Two holes
are provided on rear panel to fix the cable
tie.
5
Install ice maker into cabinet. Push any
extra drain hose or power cord in the slot
provided on the ice maker back panel.
Follow the same procedure while placing
the unit back in the cabinets after servicing.
NOTE: Connections can be routed out from
both right and left sides. The illustration
shows the connections routed out from the
left side.
Cable tie
INSTALLATION | 27