Installing The Drain Pump - Jennair JUIFX15HX Guide D'installation

INSTALLATION

INSTALLING THE DRAIN PUMP

22 | INSTALLATION
NOTE: Do not kink, smash or damage tubes or wires
during installation.
Screws
Unscrew the screws (7) attaching rear panel
1
to ice maker. Remove the rear panel.
Clamp
Old drain tube
Remove the old drain tube and clamp
2
attached to the ice maker bin.
NOTE: Discard old drain tube and clamp.
7/8" adjustable hose clamp
Drain tube (ice bin to drain
pump)
7/8" adjustable hose clamp
Drain pump reservoir inlet
New drain tube (5/8" I.D. x 5 ⁄ ") is provided
¹
3
8
in the ice maker bin. Install new drain tube
to drain pump reservoir inlet using new
adjustable clamps.
NOTES:
Do not kink.
■
Trim tube length if required.
■