Jennair JUIFX15HX Guide D'installation page 19

INSTALLATION
Flush out tubing by placing the free end
4
of the tubing into a container or sink, and
turning on the main water supply until water
is clear. Turn off shut-off valve on the water
pipe.
IMPORTANT: Always drain the water line
before making the final connection to the
inlet of the water valve to avoid possible
water valve malfunction.
Remove and discard the short, plastic tube
5
from the end of the water line inlet. Thread
the nut onto the end of the tubing. Tighten
the nut by hand. Then tighten it with a
wrench two more turns. Do not overtighten.
Turn shutoff valve on. Check for leaks.
6
Tighten any connections (including
connections at the valve) or nuts that leak.
INSTALLATION | 19