Preparing The Bottom Hinges - Jennair JUIFX15HX Guide D'installation

DOOR REVERSAL

PREPARING THE BOTTOM HINGES

14 | DOOR REVERSAL
4
Black screw cover
Hinge shim
5
Once both hinges are removed, unscrew
1
the grill cover using a TORX T20
screwdriver.
NOTE: The grill cover may fall open. This is
normal.
Remove the black screw cover from the
2
grill by opening the grill cover, pushing the
screw cap inwards, and sliding it out to the
side. Remove the hinge shim.
†TORX and T20 are trademarks of Acument Intellectual Properties, LLC.
Grill cover
To attach the black screw cover to the
3
opposite side, first pull the grill cover out.
†
Place the black screw cover between the
4
grill and the screws. Install the hinge shim
on the opposite side, making sure the notch
face down and in.
NOTE: Be sure that all of the cover edges
are behind the lip of the grill, or it will not
stay in place.