DOOR REVERSAL
REMOVING HINGE COVERS
10 | DOOR REVERSAL
!
If door reversal is not needed, skip "Door Reversal" section and go to "Installation" section.
WARNING
Crush Hazard
Articulated hinges are self closing and many
pinch points exist prior to cabinet
installation.
Do not remove hinge covers until product is
ready to be installed.
Failure to follow these instructions can result
in crush, cut, or pinch injuries.
Remove the screws attaching top and
1
bottom hinge covers using the flat head
screwdriver.
Top hinge cover
Bottom hinge cover
Remove the hinge cover from top and
2
bottom hinges.
To remove hinge covers, cut hinge cover at
3
indicated point using diagonal cutting plier
and remove from hinges.
NOTE: Reinstall the hinge covers if product
is removed from cabinet installation.