Xerox Phaser 6180MFP Guide De Configuration page 15

Step 3: Setting Up the Fax
1. Verify that your fax phone line is connected.
2. From the control panel:
a. Press the System button.
b. Select the Admin Menu.
c. Select the Fax Settings.
d. Select your country.
e. Enter your fax number (this number prints on the header of the
faxes).
Step 4: Using the Address Book Editor to Add an Individual
to Your Fax Addresses
1. Windows: On the Start menu, select All Programs/Xerox/
Phaser 6180MFP/Address Book Editor, and then click OK.
Macintosh: From the Application folder, click Xerox/
Phaser 6180MFP, and then double-click Address Book Editor.
2. In the left navigation panel, right-click the Fax icon and then select
New and New Entry. The Speed Dial dialog box opens. The
Address Book Editor automatically assigns the speed dial number
to the first empty entry.
3. To manually specify the speed dial number, click Specify an
Address Number, and then enter a value from 1 to 200 for the
speed dial number. The first ten entries in the Address Book
correspond to the ten one-touch buttons found on the left navigation
panel of the control panel.
4. Type in a value for Name and Phone Number.
5. To add this entry to an existing group:
a. Click Group Membership.
b. Select the group(s) to add this entry to, and then click OK.
6. Confirm the group members, and click OK.
7. Click OK.
8. Windows: On the File menu, select Save all.
Macintosh: On the File menu, select Save.
The address book is saved with the new fax entry.
Phaser® 6180MFP Multifunction Printer
Setting Up the Printer Features Connecting over USB
EN - 13