SKY PARAGLIDERS GII 2 Mode D'emploi page 29

GII 2 alpha – reserve fitting
Connect the reserve bridle to the har-
ness risers, secure with the O rings.
Insert the pins into their colour
coded loops & pull the rubber pin
retainer into position over the pin.
Remove the threading lines!
Connect the deployment handle to
the central attachment loop using a
larks foot knot.
Position the pins & the handle underneath the neoprene cover. Secure the
Velcro tape & insert the final under surface leaf of the container into its pocket.
Insert the reserve with the handle
attachment facing upwards and
the lines underneath.
Using the lines provided (located in
the rear pocket), thread the eyelets
in sequence.
29