SKY PARAGLIDERS GII 2 Mode D'emploi page 27

GII 2 – reserve fitting
Connect the reserve bridle to the har-
ness risers, secure with the O rings.
Locate the pins into their corre-
sponding colour coded loops and
be sure to remove the packing line!
Stretch the rubber O ring over the
pin.
Attach the handle to the centre
loop on the container. Slightly
crease the reserve in two and in-
sert into the pocket.
Complete the sequence by loca-
ting the pins and handle under the
neoprene flap and secure with the
Velcro flap.
Thread the leafs in sequence using the line provided from the reserve packing
& maintenance kit (located in the rear harness pocket).
27