Nidec MANUBLOC 3000 Guide D'installation page 10

This document complements the general instructions ref. 2557 (recommendations), Maintenance manual Manubloc 3000
Nidec Leroy-Somer reserves the right to modify the characteristics of its products at any time in order to incorporate the latest
technological developments. The information contained in this document may therefore be changed without notice.
Nidec Leroy-Somer gives no contractual guarantee whatsoever concerning the information published in this document and cannot
be held responsible for any errors it may contain, nor for any damage resulting from its use.
Throughout the manual, this symbol warns of consequences which may arise from inappropriate use of the Manubloc 3000 since
risks may lead to material or physical damage.
Despite all the care taken in the manufacture and checking of this equipment, Nidec Leroy-Somer cannot guarantee that lubricant
will not escape during the product's lifetime. If slight leaks could have serious consequences for the safety of people and property,
the installer and user should take all necessary precautions to avoid such consequences.
1 - INSTALLATION RECOMMENDATIONS ..............................................................................11
1.1 - Identification ................................................................................................................................................. 11
1.2 - Torque point ................................................................................................................................................. 11
1.3 - Hollow shaft ................................................................................................................................................. 11
2 - OPTIONS MOUNTING ..........................................................................................................12
2.1 - Shrink disc ................................................................................................................................................... 12
2.1.1 - Mounting .............................................................................................................................................. 12
2.1.2 - Exploded view, parts list ....................................................................................................................... 12
3 - MAINTENANCE ....................................................................................................................12
4 - LUBRICATION ......................................................................................................................12
4.1 - Plugs positions ............................................................................................................................................. 13
4.2 - Multistage Manubloc: oil quantities (considering operating position) ............................................................. 13
4.3 - Combined Manubloc: oil quantities for combined Mub/Cb (considering operating position) ......................... 14
Copyright 2020: Moteurs Leroy-Somer. This document is the property of Moteurs Leroy-Somer. It cannot be reproduced in any form without prior authorisation. All brand
names are registered trademarks.
10
INSTALLATION - DRIVE SYSTEMS - MANUBLOC 3000
ref. 5066 is on: www.leroy-somer.com/documentation_pdf/5066-en.pdf
and ref. 3711, 3804 for Atex specific recommendations.
NOTE
CAUTION
CONTENTS
Installation - MANUBLOC 3000
4031 en - 2020.03 / j