Hisense FT124D4HW1 Manuel D'utilisation page 21

Installation important!
For electrical
carefully,
instructions given
manual.
Unpack the appliance and
check if there are damages
on it. Do not connect the
appliance if it is damaged.
Report possible damages
immediately to the place you
bought it. In this case retain
packing.
It is advisable to wait at least
four hours before connecting
the appliance to allow the oil
to flow back
compressor.
Adequate air
should be allowed around
the appliance reducing the
risk of overheating.
achieve sufficient ventilation,
follow the
relevant to installation.
Wherever possible the back
connection
follow the
in this
in the
circulation
To
instructions
of the product should not be
close to a wall to avoid
touching or catching warm
parts
condenser) to prevent the
risk of a fire, follow the
instructions
installation
The appliance must not be
locate close to radiators or
cookers.
Make sure that the mains
plug is accessible after the
installation of the appliance.
Service
Any electrical work required
to do the servicing of the
appliance should be carried
out by qualified electrician or
competent person.
product must be serviced by
an authorized
Center, and only genuine
spare parts must be used.
6
(compressor,
relevant to
This
Serviced