Hisense FT124D4HW1 Manuel D'utilisation page 19

It is dangerous to alter the
specifications or modify this
product in any way.
Any damage to the cord may
cause a short circuit, fire,
and/or electric shock.
Electrical safety
1. The power cord must not
be lengthened.
2. Make sure that the power
plug is not crushed or
damaged. A crushed or
damaged power plug may
overheat and cause a fire.
3. Make sure that you can
access the main plug of the
appliance.
4. Do not pull the main
cable.
5. If the power plug socket
is loose, do not insert the
power plug. There is a risk
of electric shock or fire.
6. You must not operate the
appliance without the
interior lighting lamp cover.
7. The fridge is only supplied
with power supply of single
phase alternating current of
220 ~ 240 V/50Hz. If
fluctuation of voltage in the
district of user is so large
that the voltage exceeds the
above scope, for safety sake,
be sure to apply A.C.
Automatic voltage regulator
of more than 350W to the
fridge. The fridge must
employ a special power
socket instead of common
one with other electric
appliances. Its plug
must match the socket
with ground wire.
Daily use
Do not store flammable
gas or liquids
appliance. There is a risk of
an explosion.
Do not operate
electrical appliances in the
appliance (e.g. electric ice
cream makers, mixers etc.).
When unplugging always
pull the plug from the mains
socket, do not pull on the
cable.
Do not place hot items near
the plastic components of
the fridge.
Do not place food products
directly against the air outlet
on the rear wall.
Store pre-packed
food in accordance with the
frozen food manufacturer's
instructions.
The manufactures storage
recommendations should be
in the
any
frozen