Functional Description; Adjusting The Nailing Depth - Makita AN610H Manuel D'instruction

FUNCTIONAL
DESCRIPTION
CAUTION:
• Always disconnect the air hose before adjusting
or checking function on the tool.

Adjusting the nailing depth

CAUTION:
• Always disconnect the hose before adjusting the
depth of nailing.
3
► 1. Adjuster 2. Shallow 3. Deep
1
► 1. Too deep 2. Flush 3. Too shallow
If nails are driven too deep, turn the adjuster clock-
wise. If nails are driven too shallow, turn the adjuster
countercolockwise.
The adjustable range is 0 - 6 mm (0 - 1/4") (One full turn
allows 0.8 mm (1/32") adjustment.)
Hook
CAUTION:
• Always disconnect the hose when hanging the
tool using the hook.
• Never hang the tool on a waist belt or like.
Dangerous accidental firing may result.
2
2 3
► 1. Hook
The hook is convenient for hanging the tool temporarily.
This hook can be installed on either side of the tool.
When changing the installation position, remove the
screw with a screwdriver. Install the hook on another
side for installation and then secure it with the screw.
Use the nose adapter
CAUTION:
1
• Always disconnect the hose before installing or
removing the nose adapter.
► 1. Hole 2. Protrusion 3. Nose adapter
If you like to protect the surface of worpiece, attach the
nose adapter of contact trip.
When nailing workpieces with easily-marred surfaces,
use the nose adapter. To attach the nose adapter to
the contact arm, press it onto the contact arm until the
protrusion in three places inside the nose adapter fit in
three holes in the contact arm.
ASSEMBLY
CAUTION:
• Always disconnect the air hose before loading
the nailer.
5 ENGLISH
1
1
2
3