Furrion FDUS50M7A Manuel D'instructions page 18

TV Settings
Press
sub-menu, then
press
select Off /On for
HDMI CEC.
HDMI CEC
When selecting
On, the sub-menu
in the right column
will be available to
set up.
Select the EDID
EDID Switch
version.
Restore Reset to factory
Default default settings.
NOTE: HDMI CEC function is only available when connecting with a CEC device.
18
Setup Menu
Auto Standby
to enter
Auto TV on
or to
HDMI ARC
Device control
Device list
Press or
Press or
to select Off or On.
Press or
*In On mode, TV will shut down when there is no signal
for several minutes.
Press or to select Off or On.
*In On mode, TV will automatically turn on when the
connected CEC device is turned on.
to select Off or On.
Press or
*Set the HDMI ARC On if you want to enable the
ARC function with a connected 5.1/7.1 Home Theater
System.
Press or to select Off or On.
* In On mode, it allows a connected CEC device to be
controlled by TV remote control.
Press to display a list of HDMI CEC devices currently
connected to the TV.
to select Auto, EDID 1.4 or EDID 2.0.
to select Yes or No.