Plan Your Installation - AEG 7306601 Manuel D'installation Et De Fonctionnement

Plan Your Installation

PLAN YOUR INSTALLATION
OUTILS REQUIS
Read through the entire manual before beginning
your installation. Follow all steps exactly. Reading
this manual will also help you get all the benefits
from your system.
Your Reverse Osmosis Drinking Water System
Adjustable wrench
can be installed under a sink or in a remote
location. Typical remote sites are a laundry room
or utility room. Review the location options below
and determine where you are going to install your
system.
NOTE: For best system performance, the feed
water to the system should be softened or have Phillips Screwdriver Tape Measure
hardness less than 1.7 mol/m3 (17°f), with no iron.
UNDER THE SINK LOCATION
The Reverse Osmosis Filter Assembly and storage
tank may be installed in a kitchen or bathroom sink
cabinet.
See Fig. 2.
A suitable drain point is needed for drain water
from the Reverse Osmosis system.
Flathead
Drill & Drill bits, if
Screwdriver
required.
REMOTE INTERIOR LOCATION
The Reverse Osmosis Filter Assembly and
storage tank may also be installed in a remote
interior location away from the Reverse Osmosis
Faucet. You will need a nearby water source and
drain point.
See Fig. 3.
Large Adjustable Jaw Pliers or Pipe Wrench
CHECK SPACE REQUIREMENTS
Check size and position of items for proper
installation into location chosen.
TOOLS NEEDED
Review the tools needed list. See Fig. 1.
Gather needed tools before proceeding with
FIG. 1
the installation. Read and follow the instructions
provided with any tools listed here.
51