Installing Windows - ASROCK A790GMH/128M Mode D'emploi

2 . 9 2 . 9 2 . 9 Driver Installation Guide Driver Installation Guide Driver Installation Guide Driver Installation Guide
2 . 9 2 . 9 Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical drive
first. Then, the drivers compatible to your system can be auto-detected and listed on
the support CD driver page. Please follow the order from up to bottom side to install
those required drivers. Therefore, the drivers you install can work properly.
2 . 1 0 2 . 1 0

2 . 1 0 Installing Windows

Installing Windows Installing Windows Installing Windows
2 . 1 0 2 . 1 0 Installing Windows
Vista Vista Vista Vista Vista 64-bit W 64-bit W 64-bit W 64-bit W ith RAID F 64-bit W
TM TM TM TM TM
If you want to install Windows
/ SATAII HDDs with RAID functions, please refer to the document at the following path
in the Support CD for detailed procedures:
..\ RAID Installation Guide
2 . 1 1 2 . 1 1 2 . 1 1 Installing Windows Installing Windows Installing Windows Installing Windows
2 . 1 1 2 . 1 1 Installing Windows
Vista Vista Vista Vista Vista 64-bit W 64-bit W 64-bit Without RAID F 64-bit W 64-bit W
TM TM TM TM TM
If you want to install Windows
TM
Vista 64-bit OS on your SATA / SATAII HDDs without RAID functions, please follow
below procedures according to the OS you install.
2.11.1 Installing Windows 2.11.1 Installing Windows
2.11.1 Installing Windows 2.11.1 Installing Windows 2.11.1 Installing Windows
F F F F Functions unctions unctions unctions
unctions
If you want to install Windows
without RAID functions, please follow below steps.
Using SATA / SATAII HDDs without NCQ and Hot Plug functions
STEP 1: Set up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set the "SATA Operation Mode" option to [IDE].
STEP 2: Install Windows
2.11.2 Installing Windows 2.11.2 Installing Windows 2.11.2 Installing Windows 2.11.2 Installing Windows 2.11.2 Installing Windows
RAID F RAID F RAID Functions unctions unctions unctions
RAID F RAID F unctions
If you want to install Windows
SATAII HDDs without RAID functions, please follow below steps.
Using SATA / SATAII HDDs without NCQ and Hot Plug functions
STEP 1: Set up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set the "SATA Operation Mode" option to [IDE].
STEP 2: Install Windows
2 8 2 8 2 8
2 8 2 8
ASRock
XP / XP 64-bit / Vista XP / XP 64-bit / Vista XP / XP 64-bit / Vista
XP / XP 64-bit / Vista XP / XP 64-bit / Vista
® ® ® ® ®
ith RAID F ith RAID Functions ith RAID F ith RAID F unctions unctions unctions unctions
® TM
XP / XP 64-bit / Vista
XP / XP 64-bit / Vista XP / XP 64-bit / Vista XP / XP 64-bit / Vista
XP / XP 64-bit / Vista XP / XP 64-bit / Vista
® ® ® ® ®
ithout RAID F ithout RAID F ithout RAID F ithout RAID Functions unctions unctions unctions unctions
® ®
XP, Windows XP 64-bit, Windows
XP / XP 64-bit Without RAID XP / XP 64-bit Without RAID
XP / XP 64-bit Without RAID XP / XP 64-bit Without RAID XP / XP 64-bit Without RAID
® ® ® ® ®
® XP or Windows ® XP 64-bit on your SATA / SATAII HDDs
Advanced screen
® XP / Windows ® XP 64-bit OS on your system.
Vista Vista Vista Vista Vista / Vista / Vista / Vista / Vista / Vista
® ® ® ® ® TM TM TM TM TM
® TM ®
Vista or Windows Vista
Advanced screen
® Vista TM / Vista TM 64-bit OS on your system.
A790GMH/128M Motherboard
/ / / / /
TM TM TM TM TM
TM
/ Vista 64-bit on your SATA
/ / / / /
TM TM TM TM TM
® TM
Vista or Windows
Storage Configuration.
64-bit Without 64-bit Without 64-bit Without 64-bit Without 64-bit Without
TM TM TM TM TM
TM
64-bit on your SATA /
Storage Configuration.
®