Bresser 70-20007 Mode D'emploi page 12

Registration and Setup
1) Select a electrical outlet for the remote socket that
is within 100 metre (330 feet) open area from the
gateway. Reduce distance if obstacles are between
the remote socket and the gateway.
2) Plug the remote socket into the electrical outlet.
3) Enable the WiFi reception on your iOS / Android de-
vice and run the "BRESSER Connect" app.
4) Select "Socket" and then tap the " i " on the upper right
corner to enter the settings display.
5) Tap "OK" in the menu [Install a new sensor now?] or
tap "Sensor list" and tap "+" to add.
6) Tap "Connect" on the app to search for the remote
socket.
7) Hold the large "LEARN" button on the remote socket
for 3 seconds to start connection.
8) Once connection is established, "Sensor is connect-
ed" appears and you have successfully registered your
12
remote socket. You may proceed to change the name
and photo. Tap the "Save" icon on the upper right cor-
ner anytime to save and exit. Return to the "Socket"
main display and your remote socket will appear.
9) If connection fails, fi nd another electrical outlet that is
closer to the gateway and repeat steps 6 to 8 until a
connection is established. Connect an electrical de-
vice to your remote socket. In the app, you can now
turn your electrical device on or off. The red indicator
will illuminate if the remote socket is turned on.