Adjusting The Recline Angle - Diono Cambria 2 Manuel D'instructions

INSTALLATION

ADJUSTING THE RECLINE ANGLE

IMPORTANT: It may also be necessary to adjust the
recline angle of the booster seat to match that of the
vehicle seat.
This booster seat features a recline angle that can adjust
to match that of the vehicle seat:
1. Push booster seat backrest
backwards until it moves freely.
2. Push seat bottom and backrest of
booster seat down and back into
vehicle seat until there is secure
positioning with the booster
seat and vehicle seat bottom
and vehicle seat back. A gap is
acceptable as long as the head
support is touching the vehicle seat
back or headrest.
20
Cambria® 2
DISENGAGING LOWER ANCHOR INSTALLATION
Follow the previous instructions in reverse order.
1.
2. Disconnect LATCH/UAS connectors from vehicle
3. Pull lower anchor adjuster straps to recess the
1
2
Reach under the bottom of the booster seat and
depress the cam lock lever while pulling the seat
away from the vehicle seat back until the lower
anchor straps are extended all the way.
anchors.
LATCH/UAS connectors into the back of the booster
seat bottom for safe storage.
diono.com
INSTALLATION
21