Safety - Relyon plasma piezobrush PZ2 Notice D'utilisation

Safety

1 Safety
Caution – Electrical voltage!
Only use the external power plug provided.
Danger from mains voltage. If the external power plug is visibly damaged:
- Do not use the damaged part.
- Have the damaged parts repaired by a qualified person or replace them.
Attention – Emissions!
Dangerous amounts of the reaction gas ozone (O
operation.
- Volumes of ozone in excess of 0.2 mg/m³ may be produced.
- Note that national health and safety measures must be observed when
operating the device.
- Only use the device in well vented areas or in conjunction with a suitable
extraction device
Attention – Damage to device!
Under no circumstances may the fan cover on the rear side of the device be closed.
This would interrupt the supply of cooling medium required in operation.
Never touch the piezo crystal on the front side of the device with sharp-edged objects.
This component may be damaged by improper handling.
Protect the plasma generator from being dropped or other hard impacts which may
damage the electronics or piezo crystal.
6
) may be produced during device
3