Disposal Of The Battery - Philips PHILISHAVE HQ4847 Mode D'emploi

Disposal of the battery

Remove the battery when you discard the
appliance. Do not throw the battery away with
the normal household waste, but hand it in at an
official collection point.You can also take the
battery to a Philips Service Centre, which will
dispose of it in an environmentally safe way.
Only remove the battery if it is completely empty.
1 Remove the powerplug from the wall
socket and pull the appliance plug out of
the shaver.
C
2 Let the shaver run until it stops, undo the
screws and open the shaver.
3 Remove the battery.
Do not connect the shaver to the mains again
after the battery has been removed.
Troubleshooting
Problem:The shaver does not work after the
on/off button has been slided upwards.
Solution: Recharge the battery.
B
If the shaver still does not work, see 'Guarantee &
service'.
ENGLISH
9