Operating The Weather Station - Auriol AHFL 433 A1 Mode D'emploi

Operating the weather station

♦ Open the battery compartment
ance by removing the battery compartment cover
♦ Insert three type AAA batteries into the battery compart-
ment as shown.
♦ Close the battery compartment
Once the power supply has been established, the display will
light up and go through a brief check of the display elements.
The weather station will now attempt to connect to the outdoor
sensor. The reception symbol
flashes on the outdoor display
NOTE
If no outdoor temperature and humidity is displayed within
around 3 minutes, the weather station will stop the reception
search. The reception symbol
are displayed on the outdoor display
It is possible that no signal can be received due to the sur-
rounding buildings or because the distance is too great.
If you are unable to establish an automatic connection to the
outdoor sensor, you can do this manually:
♦ Press and hold the
flashes on the outdoor display .
♦ Press the TX button
sensor radio signal.
AHFL 433 A1
on the rear of the appli-
.
above the channel display
.
goes out, and
.
button until the reception signal
to manually initiate the outdoor
.
and
GB │ IE │
39 ■